Vol'jin's Pride hearth

[siofral]

The guide isn't recognizing hearth already set for Vol'jin's Pride

[ZG Support 1]

Will look into this. Probably just a typo in how we spelled it in our files.

[siofral]

You know, I looked at that . . . but couldn't see an obvious fault in the data.

[ZG Support 1]

When it was having a problem with recognizing this was it the travel system that just didn't tell you to use it or was it a step to set the hearth that didn't recognize it and advance?

[siofral]

Step to set the hearth but it was kind of odd. This toon had been Vol'jin's Pride and had set the hearth, then had gone off and done other things before coming back to engage the questline. The "set hearth" bit is buried in the questline, not the first thing in the set. So when the right number of things had been collected/killed and the quests had been turned in, the guide THEN set the hearth (why not as soon as it was available, no clue) and it didn't automatically clear. I had the choice of "mark complete" or reset the hearth. Shouldn't have happened, should have seen the hearth was already set (noticed this in other places so it's an oddity of the guide) and skipped forward.

One more thing. The guide will also miss that the flightpath is set and advise getting it . . . after advising the toon fly there. Lack of checking again, I suspect.

Hope this helps.

[ZG Support 1]

Not sure what's happening with that hearth location but the guide viewer can't check what flight paths you have unless you open the flight map with a flight master. At that point it should be saving all known flights it can see on that map into the SavedVariables file in order to know which ones you have. If it's saying you don't have one after opening up the flight map it's possible that something is keeping it from writing to the SavedVariables file.

[siofral]

See the report I made this morning. It speaks to this. I don't see it as a saved vars issue.